Effects of tool overhang on selection of machining parameters and surface finish during diamond turning

Mishra, Vinod and Khan, G.S. and Chattopadhyay, K.D. and Nand, Keshva and Ramagopal, S.V. (2014) Effects of tool overhang on selection of machining parameters and surface finish during diamond turning. Measurement, 55. pp. 353-361. ISSN 0263-2241

Full text not available from this repository.
Official URL: http://www.sciencedirect.com/science/article/pii/S...

Abstract

In precision machining leading to nano-metric surface finish, selection of the suitable machining parameters is a critical task. To ensure the desired surface quality, one needs to optimally select the machining parametric matrix. Towards this effort, this paper adds another critical parameter in terms of tool overhang. A well-defined set of machining exercises is carried out with different tool overhangs and machining parameters. In this investigation, an attempt has been made to locate the optimum range of tool overhang with minimum tool vibrations. The interaction between tool overhang with other parameters is also thoroughly investigated. Another important focus of this study is to find out the optimum machining parameters for the situations where it is not possible to select an optimum tool overhang. One such situation occurs when a steep concave parabolic surface needs to be fabricated. In this case a large tool overhang has to be selected. Power spectral density distribution analysis of surface roughness for different tool overhangs is performed to find out significant parameters and their degree of contribution to surface roughness. Analysis of variance is also applied to ascertain statistically significant factors contributing to surface roughness. To model the surface roughness, response surface methodology is being used. The model has been verified by conducting a series of experiments and a steep concave parabolic surface is developed by following the predictions of the developed model.

Item Type: Article
Uncontrolled Keywords: Tool overhang; Surface roughness; Single point diamond turning; Tool vibration
Subjects: CSIO > Optics
Depositing User: Ms. Jyotsana
Date Deposited: 20 Jul 2015 10:51
Last Modified: 20 Jul 2015 10:51
URI: http://csioir.csio.res.in/id/eprint/517

Actions (login required)

View Item View Item